DigiGrid MGO 사용자 설명서 - 페이지 17

{카테고리_이름} DigiGrid MGO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiGrid MGO 19 페이지.
DigiGrid MGO에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

■ SAMPLE RATE sets the sample rate when Clock Source is set to Internal. Range: 44.1 / 48 / 88.2 / 96 kHz.

■ SAMPLE RATE MODE sets the MADI mode for 88.2 / 96 kHz operation; check your console manual for the proper selection.

Range: High Speed, SMUX.

■ STATUS displays synchronization status (Sync or No Sync).

■ CURRENT CLOCK SOURCE IS displays the current sync method.

■ SoE displays Sync over Ethernet status (On or Off ).

■ CLOCK SOURCE AUTO-SWITCHING allows the MGB/MGO driver to switch between clock sources if it finds a higher priority

source than the currently selected source. Sync priority order is: SoE, WC, Digital 1, Digital 2, and Internal.