DigiGrid MGO 사용자 설명서 - 페이지 9

{카테고리_이름} DigiGrid MGO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiGrid MGO 19 페이지.
DigiGrid MGO에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

2. INSTALLATION AND CONFIGURATION OVERVIEW

After you register your new MGB/MGO, you can download the installer from the Download section of the Waves website.

Since SoundGrid enables you to access an I/O device from any computer in the network, you will need to install the software on

each computer.

The MGB/MGO installer consists of:

> The MGB/MGO I/O hardware driver.

> The SoundGrid ASIO/Core Audio driver, which serves as a bridge between the DAW and the SoundGrid network.

> The SoundGrid Studio Application, which manages all SoundGrid network resources and assigns devices to computers.

> StudioRack, a software plugin rack, or chainer, that hosts up to eight plugins and can move their processing from the DAW to an

external SoundGrid server (External server not included).

> eMotion ST, a software mixer that provides low-latency plugin processing and monitor mixing. Requires an external server.

In order to use MultiRack SoundGrid, please install it.

Access the MGB/MGO control panel via the Inventory window

in the MultiRack SoundGrid application.

1. Launch the MultiRack SoundGrid Application.

2. Enter the Preferences window by typing Ctrl+P (Windows) or

Cmd+P (Mac), or from the appropriate application menus.

3. Under Local LAN Port, choose the adapter that is connected to the

SoundGrid network/MGB/MGO. Network adapters are displayed as MAC

addresses and port names.