Creo Trendsetter 400 시각적 빠른 참조 - 페이지 7
{카테고리_이름} Creo Trendsetter 400에 대한 시각적 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Creo Trendsetter 400 9 페이지.
페이지 인쇄Cleaning Inside the Output Device
Trendsetter 400/800
!
WARNING: Risk of electrical shock if liquids are
alowed to run freely into the output device.*
CAUTION: Be careful not to bump your head on
the raised panel.*
1
To open the front panel:
a. Rotate the two latches on the
front panel to the vertical position
(90° counterclockwise).
b. Lift the front panel.
The top access panel opens by itself.
6
* Refer to the Operator Manual for full details.
Cleaning the Edge Detection Strip
2
Rotate the drum to expose
the edge detection strip.
Cleaning the Plate Roller
2
Locate the blue plate roller:
Trendsetter 400/800
3
Dampen a cloth with isopropanol and swipe it
along the strip once, in one direction only.
3
Dampen a lint-free cloth with water, and
slide the cloth over the plate roller.
4
To close the panels:
a. Pull down the front panel and
turn the locking latches.
b. Pull down the top panel and
then push on the two corners
to lock the internal latches.