Creo Trendsetter 800 시각적 빠른 참조 - 페이지 9
{카테고리_이름} Creo Trendsetter 800에 대한 시각적 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Creo Trendsetter 800 9 페이지.
페이지 인쇄Removing a Flyoff
Trendsetter 400/800
!
1
The device suspends activity.
CAUTION: Wear protective
gloves when handling plates.*
CAUTION: If you have an
implanted cardiac pacemaker,
stay more than 7 cm away from
the magnetic clamps.*
3
Rotate the drum to expose
the trailing-edge clamps.
8
In Print Console, click Resume.
8
* Refer to the Operator Manual for full details.
2
4
Slide the trailing-edge
clamps off the plate.
9
Reposition the trailing-edge clamps:
a. Align the trailing-edge clamps with the
leading-edge clamps.
Open the front panel:
a. Rotate the two latches on the
front panel to the vertical position
(90° counterclockwise).
5
Fold over the corners
of the plate.
b. Ensure that the S or N (magnetic polarity)
on each clamp matches the S or N label on
the drum.
Trendsetter 400/800
b. Lift the front panel.
6
Press the leading-edge
7
clamps to free the plate.
The top access
panel opens by
itself.
Clean out any debris
left behind.
10
Close the front panel, then
close the top panel.
11
In Print Console, click Resume.