Archos 100 series 사용자 설명서 - 페이지 9

{카테고리_이름} Archos 100 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Archos 100 series 13 페이지. Digital video recorder for archos jukebox multimedia (jbm 20) and for archos video av 100 and 300 series
Archos 100 series에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄

If a timer is set for a date that is earlier than the current month's date, then the timer assumes

that the date is for the following month. For example, if the current date is April 16, then the

first timer in the screen shot above will record on May 11 from 2pm to 4pm. The second

timer will record on April 18 from 4pm to April 19 at 2am (an extremely long recording to be

sure).

•

Make sure that you click on the Set button in order to set the timers. The pencil icon in each

box will turn into a green check mark indicating that the timer has been set.

•

Once a timer recording has been made, or the date of a recording has been passed, without the

recording having been made (the Archos unit was not turned on or was not in pre-record

mode), the timed program will be erased from the timer screen and replaced with a red X.

•

Long recording times (2 hours and more) can create files that are greater than 2GB each. The

DVR will create multiple files in order to make long recordings. Thus a long timer program

may produce video files called VID0000, VID0001, and VID0002. This is only in the case of

recordings that are over 2GB in size.

•

When you set the timer programs that you have entered, the Archos device will create a text

file on the root of the hard disk called DVRTimer.txt. You should not erase this file.

Troubleshooting

Problem: Sometimes I see a recorded video make small jumps or skips while playing. It does not

happen at the same place all the time.

Solution: This could be due to the differences between the NTSC and PAL television systems which

have 30 frames per second and 25 frames per second respectively. Make sure that your Jukebox

Multimedia or Archos AV is set to the same video output standard as the recording was made. Go to

Setup then Display, and change the TV standard to the standard system of your country.

Problem: I can't get my DVR to record.

Solution: Did you...

Plug in the DVR when the Archos Device was off?

Make sure you have a video signal connected to the video-in of the DVR?

Try resetting the setup parameters to the default settings as shown in sections 2, 3 and 4?

Make sure your AV300 or Jukebox device is powered via the included AC Adapter?

Problem: I get a message "Wrong module" on the screen.

Solution: The Jukebox Multimedia is not recognizing the DVR. It may have been improperly

connected to the Jukebox Multimedia or it may actually be another DVR module compatible with

a different Archos Product. Shut off the Jukebox Multimedia, disconnect the DVR, then carefully

reconnect it. Turn on the Jukebox Multimedia to see if this fixes the problem.

Problem: When I go to Video Corder the screen says "No input Signal"

Solution: The DVR does not recognize any input video signal. Try changing the setting Source

from Auto to either composite or S-video. Plug your cable into a television to be sure that you

really do have a video signal coming from the cable.

Problem: The remote control doesn't work.

Solution: 1) Make sure you are aiming it at the correct face of the DVR infrared receptor. 2) make

sure you are closer than 3 meters (10 feet). 3) Make sure your Archos Device has the correctly

selected remote control code (see section 5.1 above). 4) Make sure the batteries are still good.

Problem: Sometimes after about 2 or more hours or recording, the recording stops and a new one

starts.

Solution: This is due to a limitation of file sizes for the Windows® file system that is used on

Archos devices. This File Allocation Table (FAT) system can have a maximum file size of 2GB.

Recordings that go over 2 hours can go over this limit. It depends on type of program being

recorded and the quality settings. A second file will automatically start up to continue the

recording. Thus a 3 hour video might be composed of VID0000.avi of 2 hours and 10 minutes and

VID0001.avi of 50 minutes. To avoid this, you can reduce the bitrate setting which will create

smaller sized files.