Archos AV120 - Video Recorder - Digital AV 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Archos AV120 - Video Recorder - Digital AV에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Archos AV120 - Video Recorder - Digital AV 7 페이지. Archos portable multimedia player user manual
페이지 인쇄4. Settings
Via the Setup menu [F1], you can adjust all the parameters of the Jukebox Multimedia.
1) To change sound settings, click Setup [F1] then [Sound]
Click [F1] to enter the Setup screen
Scroll to [Sound] with UP and Down Buttons
Click Play to enter [Sound Menu]
Scroll up and down to locate the parameter to change. Use Left and Right to change values
Changes take effect immediately
Click [F2] to go back then [F2] to go back to main browser screen
The setup screen
Adjusting the sound parameters
2) To change other settings, click Setup [F1] then the type
Click [F1] to enter the Setup screen
Scroll to settings type you want, Sound, Playmode, Repeat & Shuffle or Settings
Scroll down to parameter to change
Use Left or Right button to change values or click Play to enter multiple list (ex: Play Mode)
For multiple list, scroll to desired parameter and click on Play to select
Round point in front of parameter indicates the selected parameter (ex: Play Mode)
Sound
Play Mode
Repeat & Shuffle
Volume
One directory
Normal
Base
All Tracks
Repeat
Treble
Single
Shuffle
Loudness,
Queue
Balance
Scan
Base Boost
Resume
Flat
Picture Pause
Pitch
Don't forget about the Interactive Manual on CD-ROM
Adjusting the Play Modes
Settings
Video: Internal LCD/External, TV
Standard: NTSC/PAL
LCD Brightness
Video X position
Video Y position
Language: English, Français, Deutsche
Power off time
Backlight off time
Show all files: on/off
Hard disk
Firmware version
Update Firmware
Complete PDF
Manual on included
CD-ROM
- 7 -
5. Recording MP3 Music
The Jukebox Multimedia & AV series are capable of recording from the built-in microphone, an analog
line source (HiFi system, Boombox, etc.), and digital SPDIF audio .
1) Click Rec'rd to enter Record
2) Adjust the recording level with
mode
the left and right buttons then
click on [F3] Start
1) Click on Rec'rd to start recording
Click [F3] to enter recording mode
Click [F2] Setup to enter your desired recording parameters
The default file name is RecXXXX where the Xs are consecutive numbers. This can be changed
now by clicking Play on Set Title or later by renaming the file.
Select Source, then click LEFT or RIGHT buttons to choose the source of the audio recording
Select the quality level in same way (Level 5 is equal to CD quality sound)
Go back...[F2] to recording screen and adjust recording level with the LEFT and RIGHT buttons
The meter shows the sound input level. Adjust for maximum without reaching ! warning indicator
Click Start [F3] to start the recording
Click Stop [F3] to stop the recording
You can click [F2] to make incremental recordings. The file name will increase in number.
6. Playing Video
The Jukebox Multimedia 20 is capable of playing MP4 Simple Profile
.avi files of up to size 352 x 288. The more powerful JBM 120 and
AV140 can play sizes up to 640x368 in European standard and
640x352 in American standard. The jukebox will not directly play files
of type .mov, .mpg, .mpeg, nor .avi files created with codecs other than
XviD and DivX. You must use the included software on the CD to re-
encode them into the proper XviD or DivX MP4 with an MP3 sound
stream.
Like a music file, you simply select the file in the browser mode and then click on play. Use the right
button to forward fast or the left button to review in reverse.
1) Hold down ON button for external video output (television)
Once Jukebox is on, connect the supplied cable to a television's composite input
The yellow lead of the cable is the video signal, the Red for Right stereo and White for left stereo
Switch your television to line-input (often found just below channel 1)
Go to Setup [F1] then to [Settings]then to [TV standard]
Select NTSC for USA televisions and PAL for European televisions. Go back to browser screen.
Press and hold the ON button for four seconds. The built-in Jukebox screen will go blank and a
video signal will be sent out to the television.
Press and hold the ON button again to switch back to viewing on the built-in screen
3) Click [F3] Stop when finished
- 8 -