Digilent 410-092P 참조 매뉴얼 - 페이지 3

{카테고리_이름} Digilent 410-092P에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilent 410-092P 4 페이지.

PmodCLS™ Reference Manual

MD2, MD1, MD0

Any external power applied to the PmodCLS must be within 2.7V and 5.5V; if you are powering the Pmod from its

VCC pin, you must operate the Pmod at 3.3V in order for the on-board step-up switching regulator to work

correctly.

Physical Dimensions

The pins on the pin header are spaced 100 mil apart. The PCB is 1.8 inches long on the sides parallel to the pins on

the pin header and 3.8 inches long on the sides perpendicular to the pin header.

Other product and company names mentioned may be trademarks of their respective owners.

Protocol

0,0,0

UART

0,0,1

UART

0,1,0

UART

0,1,1

UART

1,0,0

TWI

1,0,1

TWI

1,1,0

SPI

1,1,1

Specified in EEPROM

Table 3. Mode jumper configurations.

Details

2400 baud

4800 baud

9600 baud

Baud rate in EEPROM

Address: 0x48

Address in EEPROM

Specified in EEPROM

Page 3 of 3