Cres Cor H-339-1813C-GMR 운영 및 유지보수 지침 - 페이지 2
{카테고리_이름} Cres Cor H-339-1813C-GMR에 대한 운영 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor H-339-1813C-GMR 4 페이지. Holding cabinet
페이지 인쇄
Insulated
FL-0520-3
Holding Cabinet
Rev. 7 (3/06)
Page 2 of 4
BEFORE CLEANING CABINET:
1. Unplug power cord from wall.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh
chemicals.
HOW TO CLEAN UNIT:
CABINET
Inside and
Outside
FINGERPRINTS,
GREASE OIL
(Aluminum)
WATER SPOTS
HOW TO ADJUST THE DOOR LATCH:
1. For vertical adjustment
(Up and down movement):
a. Loosen (2) screws located in magnetic
strike on cabinet.
b. Move strike up or down for alignment
to magnet on latch.
c. Tighten screws to secure
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
INSTALLATION INSTRUCTIONS
FOR HOLDING CABINET
SOIL
Mild detergent* and hot water,
or mild abrasive cleaner.
DIRT
Steam (no strong alkaline
additive)
Detergent* and hot water.
Chemical oven cleaner for
aluminum.
Mild abrasive cleaner.
Oily or waxy cleaner.
Mild abrasive cleaner.
* Mild detergents include soaps and non-abrasive cleaners
5925 Heisley Road • Mentor, OH 44060-1833
Hints:
1.
Wipe up spills as soon as possible.
2.
Clean cabinet regularly to avoid heavy dirt build-up.
3.
Make a test spot with cleaner.
4.
Follow manufacturer's directions on cleaner.
5.
Do not mix cleaners
6.
Avoid drips and splashes.
CLEANER
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
1. Rinse after steam cleaning.
2. Wipe dry.
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Follow oven cleaner manufacturer's
directions.
Apply with soft, clean cloth.
Wipe with damp cloth.
2. For horizontal adjustment
(Greater or lesser magnetic draw):
a. Loosen four (4) screws in latch on door.
b. Move latch forward or backward to
adjust magnetic draw.
c. Tighten screws to secure.
METHOD