Archos 500876 사용자 설명서 - 페이지 7
{카테고리_이름} Archos 500876에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Archos 500876 10 페이지. Helmet camcorder for gen 5 series
페이지 인쇄
Checking the Status of the ARCHOS Helmet Cam
In order to find out whether the Helmet CamCorder is idle or recording, press the Status Button. The
lights will indicate the status of the ARCHOS device as shown below:
•
Red and green: the ARCHOS device is presently making a recording.
•
Green: the Helmet CamCorder is connected correctly to the ARCHOS device and a recording can be started.
•
No light: the Helmet CamCorder is not connected properly to the ARCHOS device or the device is off.
Notes on the ARCHOS Helmet Cam
•
Do not be concerned if the controller's lights are not lit while your Helmet CamCorder is in use. This is normal.
•
The loudspeaker of your ARCHOS device will be disabled during the recording as this could result in
audio feedback. The microphone integrated into the camera controller will record the sound. Therefore
make sure that it is not covered in order to obtain the best possible sound for your recording.
•
If images look distorted, you might be too close to the object you are filming. This effect is also re-
ferred to as "fish eye effect". The range for obtaining undistorted images is between 1.5 and 10 meters.