ARCHPOT 304 설치 및 운영 매뉴얼 - 페이지 9

{카테고리_이름} ARCHPOT 304에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCHPOT 304 12 페이지. Apf burner system

Product

Maintenance

CAUTION!

Architectural Pottery Tumbled Lava Rock and Fire Glass are accepted media. Use

caution when in the immediate area, as pieces may pop or explode when exposed to

heat or moisture.

• Clean the burner assembly and bowl with a wet cloth or cleaning solution to remove carbon build-up,

frequency of the cleaning will depend on usage.

• Inspect the gap between the base of the bowl and the mounting bracket. It should be kept free of dirt and debris

that may restrict ventilation and drainage (see Figure 3).

• Periodically inspect the underside of the burner assembly for any signs of excessive temperatures.

Check that all gas connections are tight.

• The vessel and burner assembly should be covered and protected from extreme weather conditions.

• The burner should not be operated in high wind conditions.

Note: If any problems occur, consult a licensed heating professional or call Architectural Pottery.

Figure 3

NOTE:

Use only approved decorative media to cover the burner assembly.

Warranty void if Mounting Bracket is not installed as required by vessels

specified in step 2 of Product Installation.

KEEP SPACE BETWEEN GFRC

VESSEL AND MOUNTING

BRACKET CLEAR OF DEBRIS.

DO NOT SEAL.