Digilin Calibre 1000 설치 매뉴얼
{카테고리_이름} Digilin Calibre 1000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilin Calibre 1000 3 페이지. Linear flood
페이지 인쇄Calibre – Linear Flood
Installation Guide
Notes
Installation should only be performed by a qualified professional
•
Install in accordance with all appropriate wiring standards
•
DALI is not SELV and needs to be wired accordingly
•
Never connect a LED fitting to a driver that is powered. Doing so may
•
result in damage to the LED.
The light source contained in this luminaire shall only be replaced by the
•
manufacturer or his service agent or a similar qualified person.
Do not install under mechanical stress.
•
Allow for expansion due to changes in temperature.
•
Please be aware that while the system has a very long operational life, faults may still occur, and provision needs to be made for maintenance.
•
Always turn off power before working on fitting.
•
All cabling connections should be sealed & protected.
•
Specifications
Dimensions
Length
Weight
Mounting Plate
digilin.com.au
+617 3899 1267
5 0 0
1 0 0 0
102 x 113
508
996
U n i t s
mm
mm
g
Product specifications are subject to change without notice
Document Rev: 1.0 - 24 June 2022
©2022 Digilin Technologies
Page 1 of 3