Digilin PosiTouch 사용자 설명서 - 페이지 4

{카테고리_이름} Digilin PosiTouch에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilin PosiTouch 6 페이지. Dali lighting controller

PosiTouch DALI - Lighting Controller

User Manual

7.0 - 23 November 2020

Multi-Master

The PosiTouch can operate in what is referred to as Multi-Master, meaning there can be more than one

controller on the DALI network (so long as they also operate in Multi-Master).

Selected Button

Connect the PosiTouch to the computer using a micro-USB cable. No other connections are

required; the PosiTouch will be powered via the USB.

Open the PosiTouch Configuration Tool. It should detect the connected PosiTouch. If it fails to,

check the USB cables is connected at both ends and press the connect button.

Change the action for each of the buttons to the desired setup

Press the save button.

digilin.com.au

+617 3899 1267

Connect button

Save Button

Status Window

Used to configure the PosiTouch to program the DALI Fade Rate & Time on

start-up. If there are multiple PosiTouch units on the DALI network, these

Fades

should only be set on 1. In order for these settings to take effect, energise the

DALI network with or after applying power to the fittings being controlled.

Here the action to perform for the 3 button states (short press, long press &

Button Actions

Shows the button that is currently being configured. You can also click on the

About button

Detects and reads settings from a connected PosiTouch.

Saves the settings to the connected PosiTouch

Displays messages during operation

release) can be configured.

button to select it.

Page 4 of 6