Cres Cor CO151H189B-Q1 설치, 운영 및 유지보수 매뉴얼 - 페이지 13
{카테고리_이름} Cres Cor CO151H189B-Q1에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor CO151H189B-Q1 13 페이지. Convection and retherm ovens with microprocessor controls
Cres Cor CO151H189B-Q1에 대해서도 마찬가지입니다: 설치, 운영 및 유지보수 매뉴얼 (13 페이지)
페이지 인쇄5925 Heisley Road • Mentor, OH 44060-1833
FOR OVENS WITH OPTIONAL PRODUCT KEYS
The Product Keys provide automatic menu selections
(arranged in banks of 5 keys, max. 10 keys). Each Product
Key can be user programmed for desired mode (PROBE or
TIMED) and the required COOK, HOLD, and PROBE or
TIME setpoints.
Each Product Key Lights up when pressed "ON".
The Product Key Light will go "OFF" when pressed a
second time or when changing any setpoint value. This
returns the control to manual operation.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING INSTRUCTIONS
CONTROL PANEL
Ovens with
Microprocessor controls
Rev. 8 (10/06)
Product Key Programming
1.
Press the desired Product Key.
2.
Press and hold the SET key until the Product Key light
begins to fl ash.
3.
Enter the desired Mode, Cook, Hold and Probe/Time
values.
NOTE: Press the SET key after each value is changed or
added to accept and store a new setpoint.
4. To exit; Press the SET key for a few seconds until the
Product Key light is extinguished.
Extra Replacement Parts:
Product Key (5 Keys) 0848-072
For Hot Unit Replacement, See Page 9:
The Hot Unit suffi x number will be Q5 (5 Keys)
or Q10 (10 Keys) instead of Q1
FL-2269
Page 13 of 13