Cres Cor Banquet Warming Cabinet EB-150 운영 및 유지보수 지침
{카테고리_이름} Cres Cor Banquet Warming Cabinet EB-150에 대한 운영 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor Banquet Warming Cabinet EB-150 4 페이지. Cres cor banquet warming cabinet operating and maintenance instructions
페이지 인쇄5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: EB-150 Banquet Warming Cabinet
ELECTRICAL SPECIFICATIONS:
Model No.
EB-150
*EB-150-CAN
EB-150-208
EB-150-240
HOW TO INSTALL UNIT:
1.
Remove all packing material from inside the
cabinet and clean cabinet thoroughly.
2.
Install all channels and shelves before the unit is
put into operation.
3.
Plug the power cord into the proper wall outlet.
HOW TO START UNIT:
1.
Turn the
POWER switch "ON". The yellow light
will turn on.
2.
Turn the thermostat to no. 10.
3.
Preheat (assuming a "cold" cabinet of 75°F/25°C):
To 150°F/65°C takes about 30 mins.
To 175°F/79°C takes about 45 mins.
To 190°F/88°C takes about 1 hour.
4. Put food into the cabinet.
5. Turn the thermostat to the required temperature.
NOTE: No. 8 is about 180°F/82°C
No. 6 is about 155°F/69°C
Proper food holding temperature is 140°F / 60°C or
higher.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Volts
Watts
120
1500
120
1500
208
1500
240
1500
Models are designed for AC Service.
*For Canadian use.
TO TURN OFF UNIT:
Push the POWER switch to "OFF".
The yellow light will go out.
Thermometer
Banquet Cabinet
Rev. 4 (4/07)
Amps
Hertz
12.5
60
12.5
60
7.3
60
6.3
60
Switch
w/Light
Insulated
FL-2257
Page 1 of 4
Phase
NEMA
1
5-15P
1
5-20P
1
6-15P
1
6-15P
Thermostat