Cres Cor Hand-Lift Cabinet H-339214 운영 및 유지보수 지침 - 페이지 2
{카테고리_이름} Cres Cor Hand-Lift Cabinet H-339214에 대한 운영 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor Hand-Lift Cabinet H-339214 4 페이지. Cres cor hand-lift cabinet operating and maintenance instructions
페이지 인쇄Insulated
FL-0520-12
Hand-lift Cabinet
Rev. 3 (1/09)
Page 2 of 4
OPERATING and MAINTENANCE INSTRUCTIONS
For INSULATED HAND-LIFT CABINET; MODEL H-339214
WARNING
BEFORE CLEANING CABINET:
1. Unplug power cord from wall.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh
chemicals.
HOW TO CLEAN UNIT:
ROUTINE CLEANING
CABINET
STUBBORN SPOTS
AND STAINS
Inside and Outside
BURNT-ON FOODS
(Stainless Steel)
OR GREASE
HARD WATER
SPOTS and SCALE
HOW TO ADJUST THE DOOR LATCH:
1. For vertical adjustment
(Up and down movement):
a. Loosen (2) screws located in magnetic
strike on cabinet.
b. Move strike up or down for alignment
to magnet on latch.
c. Tighten screws to secure
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
SOIL
Soap, Ammonia, or mild* detergent
and water
Mild abrasive made for stainless steel
Chemical oven cleaner for stainless
steel
Vinegar
* Mild detergents include soaps and non-abrasive cleaners
5925 Heisley Road • Mentor, OH 44060-1833
Hints:
1.
Wipe up spills as soon as possible.
2.
Clean cabinet regularly to avoid heavy dirt build-up.
3.
Make a test spot with cleaner.
4.
Follow manufacturer's directions on cleaner.
5.
Do not mix cleaners
6.
Avoid drips and splashes.
CLEANER
2. For horizontal adjustment
(Greater or lesser magnetic draw):
a. Loosen four (4) screws in latch on door.
b. Move latch forward or backward to
adjust magnetic draw.
c. Tighten screws to secure.
METHOD
1. Sponge on with cloth.
2. Rinse with water.
3. Wipe dry.
1. Apply with damp sponge or cloth.
2. Rub lightly.
Follow oven cleaner
manufacturer's directions.
1. Swab or wipe with cloth.
2. Rinse and dry.