Digilock DAK1-APH1 제품 설명서 - 페이지 3

{카테고리_이름} Digilock DAK1-APH1에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock DAK1-APH1 4 페이지. Keypad locks advanced security assigned use 4g

Assign User Credential (User Code or User Key)*

Assign a User Code (Default User Code = 1234)

Press = ` , then touch a registered Manager Bypass Key to the key slot until the LED turns on.

Press = ____ `. A two-tone beep will be heard.

(new 4-digit User Code)

Confirm entry. Press = ____ `. Two sets of two-tone beeps will be heard and the LED will turn off.

Assign a User Key

Press = `, then touch a registered Manager Bypass Key to the key slot until the LED turns on.

Touch any User Key to the key slot until a two-tone beep is heard and the LED turns off.

*Once a User Credential is assigned, the previous User Credential will no longer operate the lock.

Operating Instructions

Operate with the assigned User Code:

To unlock: Press = ____ ` . The latch will retract for approximately 6 seconds to allow the door to be opened.*

▪

(assigned User Code)

To lock: Close the door.

▪

Operate with the assigned User Key:

To unlock: Touch the assigned User Key to the key slot. The latch will retract for approximately 6 seconds to allow the door to

▪

be opened.

To lock: Close the door.

▪

Operate with a registered Manager Bypass Key:

To unlock: Touch a registered Manager Bypass Key to the key slot. The latch will retract for approximately 6 seconds to allow

▪

the door to be opened.

To lock: Close the door.

▪

Operate with the Programming Key:

To unlock: Press = `, then touch the Programming Key to the key slot. The latch will retract for approximately 6 seconds

▪

to allow the door to be opened.

To lock: Close the door.

▪

*The lock will go into "Sleep Mode" after 3 consecutive incorrect entries.

Product Guide

Keypad Locks Advanced Security

(same 4-digit User Code)

Assigned Use

DAK1-APS1, DAK1-APV1 & DAK1-APH1

Phone: 707 766 6000