Digilock DCR1-APV1 제품 설명서 - 페이지 3

{카테고리_이름} Digilock DCR1-APV1에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock DCR1-APV1 4 페이지. Rfid cam locks advanced security assigned use

페이지 인쇄
Digilock DCR1-APV1 제품 설명서
Assign User Credential (RFID Card or User Key)*
Assign an RFID Card
a.
Press and hold ` for 5 seconds until a two-tone beep is heard and the LED starts to flash.
b.
Touch a registered Manager Bypass Key to the key slot until a two-tone beep is heard and the LED turns on.
c.
Present an RFID Card to the Reader until two sets of two-tone beeps are heard and the LED turns off.
Assign a User Key
a.
Press and hold ` for 5 seconds until a two-tone beep is heard and the LED starts to flash.
b.
Touch a registered Manager Bypass Key to the key slot until a two-tone beep is heard and the LED turns on.
c.
Touch any User Key to the key slot until two sets of two-tone beeps are heard and the LED turns off.
*Once a User Credential is assigned, the previous User Credential will no longer operate the lock.
Operating Instructions
Operate with the assigned RFID Card:
To unlock: Press `, present the assigned RFID Card to the Reader, turn the knob/lever to the unlocked position, then open
▪
the door.*
To lock: Close the door, then turn the knob/lever to the locked position.
▪
Operate with the assigned User Key:
To unlock: Touch the assigned User Key to the key slot, turn the knob/lever to the unlocked position, then open the door.*
▪
To lock: Close the door, then turn the knob/lever to the locked position.
▪
Operate with a registered Manager Bypass Key*:
To unlock: Touch the registered Manager Bypass Key to the key slot, turn the knob/lever to the unlocked position, then open
▪
the door.*
To lock: Close the door, then turn the knob/lever to the locked position.
▪
Operate with the Programming Key*:
To unlock: Press `, touch the Programming Key to the key slot, turn the knob/lever to the unlocked position, then open the
▪
door.*
To lock: Close the door, then turn the knob/lever to the locked position.
▪
*The lock will remain in the locked position if the knob/lever is not turned within approximately 6 seconds.
Product Guide
RFID Cam Locks Advanced Security
Assigned Use
DCR1-APV1
www.digilock.com | [email protected]
Phone: 707 766 6000