Digilock Next Mech 제품 설명서 - 페이지 3
{카테고리_이름} Digilock Next Mech에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Next Mech 3 페이지.
페이지 인쇄
Accommodates door thickness up to 20mm
door thickness less than 8mm
Mounting plate
Support
Mounting screws
Replace Key Set and Core
Please contact [email protected] if your Manager or Programming key(s) are lost or stolen to purchase a new set of keys and replacement
cores for all locks.
If your Manager Key was lost or stolen, you can remove lock cores with your existing Programming key. Once you remove the lock cores, contact
[email protected] to purchase a new set of keys and lock cores.
1
Manager key
Factory default code 0-0-0-0
Turn the knob to the unlocked
4
New Core
Triangle Mark
aligned with
Raised Wafers
Insert the replacement Programming Key into
the old Knob and place the NEW Core on the
Knob. The triangle mark
on the knob should
be aligned with the Raised Wafers.
Does not Unlock with Assigned Combination
The previously assigned combination has not been cleared, follow instructions to Assign a User Combination to set a new combination. If the
currently assigned combination is unknown, see instructions to "Reset Combination".
Dials do not stop when Using the Reset Tool
The Reset Tool must be inserted firmly while simultaneously turning the dials. If the dials do not stop try pushing the Reset Tool with more force.
092419
PG-NLMD-AP-AEN
Product Guide
Spacer required for
2
Programming Key
Removal key
Insert the old Programming Key.
position.
Turn the Knob to the Core Programming
Position. The triangle mark on the Knob
align with the circle mark
5
Insert the new Core subassembly into the lock.
The triangle mark on the Knob
the circle mark
Dial Combo
Note "P" for
Programming
on key
will
on the face.
will align with
on the face.
31.50
Assigned Use
3
Door thickness (mm)
Screw type
Spacer required
0 - 5
M3X10
5 - 8
M3X14
8 - 12
M3X10
12 - 16
M3X14
16 - 20
M3X18
Pull the Programming Key to remove the old
Knob and Core.
6
Turn the knob to the unlocked
Remove the Replacement Programming Key.
Phone: +852 2776 0800
www.digilock.com | [email protected]
✓
✓
position.