Digilock numeris aspire 제품 설명서 - 페이지 4

{카테고리_이름} Digilock numeris aspire에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock numeris aspire 6 페이지. Touch rfid latch mechanism
Digilock numeris aspire에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 제품 설명서 (11 페이지)

페이지 인쇄
Digilock numeris aspire 제품 설명서
Programming Instructions
Assign User Credentials
Up to 20 user credentials (User Key or RFID) may be assigned to each lock.
1
Touch and hold
for 5
`
seconds (a two-tone beep will
be heard after 5 seconds) then
release.
The LED will flash and the
Reader will turn on.
Express Register User and Manager Credentials
The Programming Key can quickly program multiple locks to operate with the same user and manager credentials.
1
Go to a lock already programmed to operate with the user and
manager credentials.
Touch and hold
for 15 seconds (a two-tone beep will be heard
`
after 5 seconds followed by 2 sets of two-tone beeps after 10
seconds followed by 3 sets of two-tone beeps after 15 seconds)
then release.
The LED will flash.
3
Insert the Programming Key to program each lock to operate with
the same user and manager credentials.
Two sets of two-tone beeps will be heard and the LED will flash
once to indicate successful programming.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
4
Product Guide
2
or
Insert a valid Manager Key or
present a valid Manager RFID.
A two-tone beep will be heard.
Touch RFID
Latch Mechanism
3
Insert each User Key or present
each User RFID one at a time.
Two sets of two-tone beeps
will be heard for each user
credential assigned to the lock.
2
Insert the Programming Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
4a
End express registration.*
Go to any programmed lock
Touch
then insert the Programming Key.
`
Assigned Use Functionality
4
or
Insert a valid Manager Key or
present a valid Manager RFID.
A two-tone beep will be heard
and the LED and Reader will
turn off.
4b