Digilock numeris aspire 제품 설명서 - 페이지 8

{카테고리_이름} Digilock numeris aspire에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock numeris aspire 11 페이지. Touch rfid latch mechanism
Digilock numeris aspire에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 제품 설명서 (6 페이지)

페이지 인쇄
Digilock numeris aspire 제품 설명서
Set Additional Lock Features
LED Usage Indicator
When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default setting is
ON (red LED flashes while lock is in use).
1
To turn off the LED Usage
Indicator:
Press
.
=` 92 `
The LED will flash.
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does
not auto unlock).
1a
To turn on Auto Unlock:
Press
.
=` 95 `
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
1
To turn off Auto Unlock:
Press
.
=` 94 `
The LED will flash.
8
Product Guide
(for shared use functionality only)
2
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
1b
Standard Keypad
Bolt Mechanism
1
To turn on the LED Usage
Indicator:
Press
.
=` 91 `
The LED will flash.
2
Enter the number of hours from
Two sets of two-tone beeps will be heard and the LED will turn off.
For example: Press
to set the lock to auto unlock after 8
8 `
hours.
2
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
Shared & Assigned Use Functionality
2
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
then press
.
1 - 9 9
`