FIAMA P50 사용자 설명서 및 유지 관리 - 페이지 3

{카테고리_이름} FIAMA P50에 대한 사용자 설명서 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. FIAMA P50 6 페이지.

MTP_

Installation

Before installing the instrument, read the following warnings:

a) Connect the instrument strictly following the instructions of the manual.

b) It is the responsibility of the user to check, before using, the correct settings of the parameters of the

instrument to avoid damage to persons or things.

c) The instrument CANNOT function in a dangerous environment (inflammable or explosive).

Description

The transducer MTP combined with the magnetic strip P50 is an incremental measure system without

contact for linear distances. The measure transducer integrates in the same device, a sensor sensitive to a

magnetic field, an electronic signals conversion circuit, and an output circuit. The sensor running on the

magnetic strip produces a signal which, opportunely amplified and worked out, is changed into an

incremental position signal for interfacing with displays, PLC, CNC, axes control, etc.

The band consists of a magnetized plastic ferrite strip with alternate magnetic poles of 5 mm pitch, carried by

a ferromagnetic steel strip. Mechanical protection of the plastic ferrite strip is supplied by a nonmagnetic

steel strip. The capacity to meausure distances longer than a meter, easy assembling, absence of parts that

contact/rub, a waterproof transducer and a water-oil-dust-shaving resistant strip make this system suitable

for a large number of applications, while taking position measurements of machinery within industries such

as: woodworking, glass, marble, etc...

Transducer mounting

For the optimal operating of the system the magnetic sensor, is necessary to observe the quotas mounting

on the following draws, pay attention that the distance between the sensor and the magnetic band doesn' t

exceed 2 mm.

MAGNETIC STRIP

Data: 13/01/16

file: MTP_ing.doc

pag 3/5