Digilock Curve RFID Basic 설치 매뉴얼 - 페이지 11

{카테고리_이름} Digilock Curve RFID Basic에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Curve RFID Basic 13 페이지. Deadlatch/deadbolt motorized rear

LOCK INSTALLATION STEPS

For illustration, a keypad front unit with a bolt rear unit is shown�

Rear View

Insert the front unit screw posts through the doors mounting holes.

Rear View

Hold the front unit against the front of the door. Use the rear unit mounting holes as a guide, then slide the front and rear units together.

Make sure the connector pins align properly with the connector.

If properly connected, a triple beep will be heard and the LED will flash three times.

Note:

Mounting hardware requires a torque level of:

Rear View

Make sure the connector pins align properly with the connector.

If properly connected, a triple beep will be heard and the LED will flash three times.

I NSTALL GU ID E

Keypad & RFID | Basic & Advanced

21.4 kgf/cm² ±20%

for hand or powered tools to insure proper lock functionality.

Front View