Digilock Numeris Versa Mini 제품 설명서 - 페이지 7

{카테고리_이름} Digilock Numeris Versa Mini에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Numeris Versa Mini 11 페이지. Touch rfid
Digilock Numeris Versa Mini에 대해서도 마찬가지입니다: 제품 설명서 (11 페이지), 매뉴얼 (18 페이지)

페이지 인쇄
Digilock Numeris Versa Mini 제품 설명서
Programming Instructions - In Assigned Use Functionality
Replace an Assigned User Credential
1
Replace an Assigned User RFID
Credential with a New User Key:
Touch and hold
`
for 5 seconds (a two-tone
beep will be heard after 5 seconds) then release.
Insert a valid Manager Key or present a valid
Manager RFID Credential..
A two-tone beep will be heard and the LED
will turn on.
1
Replace an Assigned User Key
with a New User Key:
Touch and hold
`
for 5 seconds (a two-tone
beep will be heard after 5 seconds) then release.
Insert a valid Manager Key or present a valid
Manager RFID Credential.
A two-tone beep will be heard and the LED
will turn on.
1
Replace an Assigned User Key
with a New User RFID Credential:
Touch and hold
`
for 5 seconds (a two-tone beep will
be heard after 5 seconds) then release. Insert a valid
Manager Key or present a valid Manager RFID Credential.
A two-tone beep will be heard and the LED will
turn on.
Product Guide
2
While the LED is on, present the assigned
User RFID Credential to be replaced.
A two-tone beep will be heard.
2
While the LED is on, insert the assigned user Key.
A two-tone beep will be heard.
2
While the LED is on, insert the assigned User Key.
A two-tone beep will be heard.
Touch RFID
Shared & Assigned Use Functionality
3
While the LED is on, insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
3
While the LED is on, insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
3
While the LED is on, present the new User
RFID Credential.
Two sets of two-tone beeps will be heard
and the LED will turn off.
7