Cres Cor H138NPSCDOM3MQ 운영 및 유지보수 지침 매뉴얼 - 페이지 2
{카테고리_이름} Cres Cor H138NPSCDOM3MQ에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor H138NPSCDOM3MQ 8 페이지. Hot cabinet
페이지 인쇄
FL-2331-DOM
Holding Cabinet
Rev. 10 (12/11)
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H138NPSCDOM Series Hot Cabinet
ELECTRICAL SPECIFICATIONS:
Model No.
H138NPSCDOM2
H138NPSCDOM3
Note: The above model numbers are basic models. They may be followed by letters: GA, L, R, 2M, D, or ending with S.
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. Place the cabinet in a well-ventilated area.
4. Place cabinet on level floor.
5. Plug cord end into proper wall outlet.
FIRST TIME START-UP:
1. Push the POWER switch to "ON", and run the
unit for one hour.
NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
Page 2 of 8
Volts
120
120
POWER
LIGHT
5925 Heisley Road • Mentor, OH 44060-1833
Watts
Amps
1400
11.7
2000
16.6
POWER
SWITCH
°F
ADJUST
SET
ADJUST
BUTTONS
HOW TO HOLD:
1. Push POWER switch to "ON." POWER LIGHT
will come on.
2. The control is preset to maintain an average of
180°F. Displayed temperatures will change during
loading and unloading of product
3. Put product into cabinet.
NOTE: Proper food holding temperature is
140°F/60°C or higher.
WARNING
WARNING
Blower inlet guard must be in place before
operating cabinet.
Hertz
Phase
60
1
60
1
TEMPERATURE
CONTROL
"SET" BUTTON
TEMPERATURE
DISPLAY
Air is VERY HOT
when door is opened.
NEMA
5-15P
5-20P