Crescent SC6000 문제 해결 매뉴얼 - 페이지 2

{카테고리_이름} Crescent SC6000에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crescent SC6000 2 페이지.
Crescent SC6000에 대해서도 마찬가지입니다: 사용자 및 유지보수 매뉴얼 (2 페이지)

페이지 인쇄
Crescent SC6000 문제 해결 매뉴얼
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
The suction
doesn't work
as it should?
The machine
doesn't clean
as it should?
The brushes
don't work as
they should?
1 Check battery charge gauge.
1 Check if the suction hose is
correctly installed and cleaned.
1 Check if you have the right water
settings.
1 Remove side skirt assembly and
verify brush installation and
condition
2 E -stop icon that appears on display
when E-stop switch is engaged.
Twist E-stop switch to enable
machine function
2 Inspect recovery tank float switch
operation
2 Check if the solution tap is open.
2 Press "I" scroll down to faults and
press ">" button to view faults
3 Check battery cables are well
connected together.
3 Check if squeegee blades are
damaged or dirty.
3 Check if the solution filter is
cleaned.
3 Check if there are external materials
avoiding brush rotating.
www.crescentindustrial.co.uk
SC6000
4 Recovery tank seal cover must
correctly installed and in good
condition.
4 Close the recovery tank cover prop -
erly and/or verify the gasket wear.