Crescent Performance 사용 설명서 - 페이지 3
{카테고리_이름} Crescent Performance에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crescent Performance 16 페이지.
페이지 인쇄1
4
1. Chassis
1. Chassis
Out of the box the Performance is fully
Out of the box the Comfort is fully assemb-
assembled and ready for use except wheels,
led and ready for use except wheels, seatu-
seatunit and canopy.
nit and canopy.
2. To unfold
2. To unfold
To open the Performance chassis stand be-
To open the Comfort chassis stand behind
hind the pushchair and, with both hands on
the pushchair and, with both hands on the
the pushbar, pull-up until the chassis clicks
pushbar, pull-up until the chassis clicks into
into place.
place.
3 and 4. Mount the wheels
3. Attach the wheels
Fit the wheels according to the instructions
Open the wheel lock by pressing. Place the
on the pictures. Insert the axls into the
wheel into the axle. Release locking catch
intended holders. The wheels are correctly
when fully inserted and wheel should lock
mounted when a click is heard. Retract to
into position. Pull on wheel to ensure that it
ensure that the wheels are in place.
is securely fitted. This process is repeated
all around.
The front wheels can be adjusted between
fixed and swiveling function using the front
adjusting knob.
2
1
4
5
5. Attaching the seat unit or carrycot
1. Chassis
4. Attaching the seat unit or carrycot
Engage the brake and place the seat unit
Engage the brake and place the seat unit
Out of the box the Comfort is fully assemb-
or carrycot over the chassis. When the seat
or carrycot over the chassis. When the seat
led and ready for use except wheels, seatu-
unit or carrycot is correctly fitted a click will
unit or carrycot is correctly fitted a click will
nit and canopy.
be heard on each side. Ensure that it is
be heard on each side. Ensure that it is se-
securely attached before use.
curely attached before use.
2. To unfold
To open the Comfort chassis stand behind
5b. Detaching seat unit or carrycot
4b. Detaching seat unit or carrycot
the pushchair and, with both hands on the
Press the release buttons on both sides
Press the release buttons on both sides
pushbar, pull-up until the chassis clicks into
and lift straight up. Marked by arrow.
and lift straight up. Marked by arrow.
place.
6. Adjusting the backrest
3. Attach the wheels
5. Attaching the canopy
Use the handle on the rear of the backrest
Fit the canopy by linserting the canopy hol-
Open the wheel lock by pressing. Place the
to adjust the backrest to desired position.
wheel into the axle. Release locking catch
ders in the holes on both sides.
when fully inserted and wheel should lock
6. Adjusting the backrest
into position. Pull on wheel to ensure that it
Use the handle on the rear of the backrest
is securely fitted. This process is repeated
to adjust the backrest to desired position.
all around.
3
2
6
5
4. Attaching the s
Engage the brak
or carrycot over th
unit or carrycot is
be heard on each
curely attached b
4b. Detaching se
Press the releas
and lift straight up
5. Attaching the c
Fit the canopy by
ders in the holes
6. Adjusting the b
Use the handle o
to adjust the back