Digimerge DNP5320E 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} Digimerge DNP5320E에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digimerge DNP5320E 19 페이지. High resolution poe dual-codec professional outdoor day/night

페이지 인쇄

Continued

OPTION 2

Hardware Installation - AC Powered Install

The Hardware installation (using 12V DC

Power) consists of removing the back plate and

installing cables to the Camera.

1. Remove the Back Plate: Once the plate is

removed, access to additional ports and AC

power becomes available:

A. Use a phillips screwdriver to loosen the 4

corner screws on the back plate.

B. Unscrew the 2 waterproof cable screws on

the bottom of the camera.

C. The back plate can now be removed. Do not

disconnect the cable from the cooling fan.

2. Power: Connect the DC power cable to

the Camera Power port, located to the right

of the Ethernet Port.

To use an external power source, the other end of

the power cable will need to be stripped so it can

be run through the Waterproof cable screw.

Hardwire the camera to the power source.

3. Once the stripped end of the DC power cable is

run through the waterproof cable screw, secure the

waterproof cable screws and then reattach the

backplate securely. If adding optional connections,

skip this step and proceed to the next page.

HARDWARE CONNECTIONS

DNP530E_Quick Installation Guide_En_R1

w w w

d i g i m e r g e

c o m

Page