Cresco CR005 매뉴얼 - 페이지 2

{카테고리_이름} Cresco CR005에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cresco CR005 6 페이지. Fertilizer and salt spreader

Assembling your Cresco 5

Locate the main unit. Inside the bag, you will

find the crank handle.

To operate, the aperture is set on the gauge

assembly as shown by locking the wing nut in

the desired position on the 1 to 6 scale.

To attach the crank handle, screw the crank

handle onto the shaft by turning it in a

clockwise direction.

Once the desired application rate is set on the

gauge, fill the bag with the fertiliser or seed

material. Crank the handle at appoximately 1

revolution a second. At the point of walking

forward, squeeze the lever up into the preset

position and material will be evenly spread out

infront as the impellor rotates. Once the area to

be treated is covered, release the lever into the

closed position and cease the cranking of the

handle.