Digimerge DPV24D 사용 설명서 - 페이지 9
{카테고리_이름} Digimerge DPV24D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digimerge DPV24D 15 페이지. Ultra resolution day & night dome camera
Digimerge DPV24D에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (14 페이지)
페이지 인쇄
CAMERA ADJUSTMENT
SENSE-UP
EXPOSURE
SHUTTER
AGC
SENSE-UP
BLC
D-WDR
RETURN
Select digital slow shutter speed setting in order to allow extra light into the camera
thereby providing higher sensitivity in low light conditions. NOTE only adjustable
if SHUTTER setting is set to 'AUTO' or '1/60'
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates SENS-UP function. Enter submenu to select maximum low shutter value
SENSE-UP
SENSE-UP
x�
RETURN
RET
Selectable low shutter values are as follows:
x2 x4 x8 x16 x32 x64 x128 x 256 (default - x8)
For proper setup, check setting during low light / night time conditions.
Notes
• It's recommended to keep the value in the x2 to x64 range to limit ghosting
effect.
-12-
1/60
MIDDLE
AUTO
OFF
OFF
RET
CAMERA ADJUSTMENT
BACKLIGHT (BLC)
The BLC menu is used to adjust backlight compensation function to sharpen subjects in backlight situations
1. Highlight 'BLC' in the exposure setup menu.
2. Press the joystick to access the BLC setup
menu.
BLC (Backlight Compensation):
Enter the BLC submenu to select an area in
the scene which requires enhancing.
Change the GAIN value (LOW/MIDDLE/HIGH)
to set level of enhancement.
BLC
HSBLC (Highlight Compensation):
If a scene contains very bright light sources (e.g. car headlights),they will be masked
to provide greater detail in the rest of the scene.
Enter the HSBLC submenu to select an area in the scene which requires masking.
Change the LEVEL value to set level of masking and change MODE to set whether
to mask all day long or during low light conditions only.
Default setting is OFF
-13-
EXPOSURE
SHUTTER
1/60
AGC
MIDDLE
SENSE-UP
AUTO
BLC
OFF
D-WDR
OFF
RETURN
RET
BLC
GAIN
LOW
AREA
DEFAULT
RETURN
RET
OFF