digimess HUC 42-03 사용 설명서 - 페이지 7

{카테고리_이름} digimess HUC 42-03에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. digimess HUC 42-03 14 페이지.

3.7

Multiple output unit in Parallel mode

Multiple output units can be set to Parallel mode by selecting the two Tracking switches to the Parallel positi-

on. The output voltage is set by the Master Voltage control and the Slave output will track the Master output

voltage level. Current adjustment is achieved using the Master Current control and the Slave current control

has no effect. In this mode the +ve terminal of the Master output should be connected to the +ve terminal of

the Slave output, the –ve terminal of the Master output should be connected to the -ve terminal of the Slave

output with a thick wire to avoid damage to the unit in the event of an overload. In this mode the maximum

output current is the sum of the Master and Slave output currents.

3.8

Caution

In the event of a short circuit at the output the current will limit at the value set by the current controls, how-

ever the unit should be turned off and the short circuit removed before continuing use.