Diginet RAPIX eHub 설치 매뉴얼 - 페이지 10

{카테고리_이름} Diginet RAPIX eHub에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diginet RAPIX eHub 16 페이지. Lighting control system

RAPIX Lighting Control System

15. Connecting masters to slaves

Slave RAPIX modular switches connect directly to masters. Slaves have an integrated flying lead with a male

connector. Masters have matching female sockets.

15.1. Typical installed connections

Typical connections between master and slave

rotary RAPIX modular switches in a two gang grid

plate

15.2. Maximum number of master / slave connections

The number of slave RAPIX modular switches supported by each type of master are shown in the table below.

Master type

Push Button

Rocker

Rotary

The maximum permissible distance between the master and slaves RAPIX modular

switches is limited to the pre-terminated slave cable length. This pre-terminated cable

must not be extended or shortened.

Connection between a

master and slave RAPIX

modular switch

Number of possible slaves connected

Slave Push Buttons or Rockers

Up to 5

N/A

RAPIX Lighting Control System - eHub

Typical connections between a master and three

slave RAPIX modular switches in a four gang grid

plate

Slave Rotary

N/A