Diginet RAPIX eHub 설치 매뉴얼 - 페이지 3
{카테고리_이름} Diginet RAPIX eHub에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diginet RAPIX eHub 16 페이지. Lighting control system
페이지 인쇄RAPIX Lighting Control System
4. Product summary and capabilities
The eHub is a RAPIX lighting control system device which connects between input peripherals and a DALI line.
The eHub manages input peripheral power requirements, as well as embedded logical functions and DALI
communications for these connected input peripherals. The connected input peripherals, such as RAPIX modular
switches and PIR sensors, are then able to communicate with a DALI Line.
The unit includes four inputs for connecting to RAPIX smart input peripherals, and two additional input
connections for occupancy sensors and/or dry contacts.
The eHub is a compact unit which fits through a standard 90mm downlight ceiling hole and is suitable for locating
in a ceiling void.
The eHub is configured via the Diginet RAPIX software suite.
5. Product features
•
Powered via external 12V dc SELV power supply
•
Input sockets for quick and easy input peripheral connection
•
Segregated terminal block for DALI Line connections
•
LED indicators for power, DALI and Ethernet
•
Suitable for mounting in a ceiling void
•
Fits through a 90mm downlight hole
•
Programmed via DALI
•
Four input connections for RAPIX smart input peripherals
•
Two input connectors for occupancy sensors and/or dry contacts input peripherals
•
Actions for connected input peripherals are configurable. For example, a RAPIX modular switch can be
configured as a toggle dimmer, memory dimmer, long press fade time, double tap action and many other
configurations
•
Support for 32 'Zones', Zones being collections of DALI Groups and/or DALI Short Addresses
•
Support for up to 16 DALI scenes and (additionally) 16 RAPIX scenes.
6. Mounting the eHub
RAPIX Lighting Control System - eHub
The eHub is suitable for mounting in a variety of
indoor locations, including above suspended tile
ceilings and fixed plasterboard ceilings.
The eHub has an ingress protection rating of IP20 and
as such is not protected against moisture ingress. It is
therefore not suitable for mounting in an outdoor
environment without being housed in a suitable
weatherproof enclosure.
The eHub includes two 6mm mounting holes. These
can be used to anchor the eHub in a suitable location,
typically using fixing screws or cable ties.
3