Diginet LEDsmart+ MultiMate MMTM/PB 설정 매뉴얼 - 페이지 8
{카테고리_이름} Diginet LEDsmart+ MultiMate MMTM/PB에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diginet LEDsmart+ MultiMate MMTM/PB 15 페이지. Push button minute timer
페이지 인쇄
F: Convert Minute to Hour Timer
If required, this minute timer can be converted to a standard LEDsmart hour timer, with a time out settable between ¼ hour and
7½ hours, in ¼ hour increments.
To convert to an hour timer, follow the steps below.
Step 1
Enter into the timer Setup Mode - See PART A
Step 2
Click the push button 6 times
Step 3
The LED Indicator will blink 6 times
Note: To cancel/exit do nothing for 30 seconds
Step 4
To change operation to hour timer mode
Push and hold the button until the lamps(s) turn ON
To change operation to minute timer mode (Set minute timer mode)
Push and hold the button until the lamps(s) turn OFF (default)
Note: To cancel/exit do nothing for 30 seconds
Step 5
Click once to save & exit
Push Button Minute Timer
8