Cisco 1538 series 설치 매뉴얼 - 페이지 7
{카테고리_이름} Cisco 1538 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1538 series 13 페이지. Micro hub 10/100 cabling and start up
Cisco 1538 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Management Options (Cisco 1538M Hub)
The Cisco 1538M hub can manage a single hub or a hub stack. You can use the default
settings shipped with the hub, or you can customize the configuration through the Cisco
1538 Hub Manager web-based interface, the CLI, or SNMP.
The Cisco 1538 Hub Manager is the easiest interface to use for the basic configuration and
monitoring tasks. To perform all the configuration and monitoring tasks, use the CLI and
SNMP.
This section provides the following information:
•
List of default configuration settings for the hub
•
Overview of the Cisco 1538 Hub Manager and the basic management tasks you can
perform using it
Note
Cisco 1538 Hub Manager pages are also provided in the Cisco 1538 Hub Manager
online help.
•
Overview of the CLI, which is fully described in the Cisco 1538 Series Micro Hub
10/100 Command Reference.
•
Overview of SNMP and the hub Management Information Base (MIB) files.
Note
the Diagnostic Console" section on page 4-7.
Procedures for performing management tasks and detailed information about the
The menu-based diagnostic console is described in the "Recovery Procedures Using
Management Options (Cisco 1538M Hub)
Overview 1-7