Cisco 2900 - Catalyst Expansion Module 설치 지침 - 페이지 6
{카테고리_이름} Cisco 2900 - Catalyst Expansion Module에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2900 - Catalyst Expansion Module 8 페이지. Rack-mounting instructions
Cisco 2900 - Catalyst Expansion Module에 대해서도 마찬가지입니다: 데이터시트 (20 페이지)
Installing the Chassis in the Rack
Step 3
Step 4
Step 5
Warning
and level.To prevent bodily injury when mounting or servicing this unit in a rack, you must
take special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
This concludes the rack-mount installation.
3-6 Catalyst 2900 User Guide
•
If the rear of the chassis will be in the front of the rack, insert the front of the
chassis between the mounting posts, and align the four mounting holes in the
L bracket with the four mounting holes in the equipment rack.
A third person should install the ten-32 x 3/4 inch slotted binder-head mounting
screws through the elongated holes in the L bracket and into the threaded holes in
the mounting post.
Use your tape measure and level to ensure that the chassis is installed straight and
level.
Make sure that your path to the rack is unobstructed.
Use your tape measure and level to ensure that the chassis is installed straight
— This unit should be mounted at the bottom of the rack if it is the only
unit in the rack.
— When mounting this unit in a partially filled rack, load the rack from
the bottom to the top with the heaviest component at the bottom of the
rack.
— If the rack is provided with stabilizing devices, install the stabilizers
before mounting or servicing the unit in the rack.