Cisco 2960-24LT-L - Catalyst Switch 데이터시트 - 페이지 10
{카테고리_이름} Cisco 2960-24LT-L - Catalyst Switch에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2960-24LT-L - Catalyst Switch 21 페이지. Switching portfolio
Cisco 2960-24LT-L - Catalyst Switch에 대해서도 마찬가지입니다: 데이터시트 (11 페이지), 브로셔 및 사양 (10 페이지), 데이터시트 (28 페이지), 설명 (1 페이지)
페이지 인쇄
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
QoS and Control
● Standard 802.1p CoS and DSCP field classification are provided, using marking and
Advanced QoS
reclassification on a per-packet basis by source and destination IP address, source and
destination MAC address, or Layer 4 TCP or UDP port number.
● Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a
per-packet basis.
● Four egress queues per port enable differentiated management of up to four traffic types.
● SRR scheduling ensures differential prioritization of packet flows by intelligently servicing the
ingress and egress queues.
● Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues
before a disruption occurs.
● Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all
other traffic.
● There is no performance penalty for highly granular QoS functions.
● The Cisco CIR function guarantees bandwidth in increments as small as 1 Mbps.
Granular Rate Limiting
● Rate limiting is provided based on source and destination IP address, source and destination
MAC address, Layer 4 TCP and UDP information, or any combination of these fields, using
QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps.
● Asynchronous data flows upstream and downstream from the end station or on the uplink are
easily managed using ingress policing and egress shaping.
● Up to 64 aggregate or individual polices are available per Fast Ethernet or Gigabit Ethernet
port.
Data Sheet
Page 10 of 21