Cisco 2975 - Catalyst LAN Base Switch 시작하기 매뉴얼 - 페이지 10
{카테고리_이름} Cisco 2975 - Catalyst LAN Base Switch에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2975 - Catalyst LAN Base Switch 17 페이지. Stackable switch
Cisco 2975 - Catalyst LAN Base Switch에 대해서도 마찬가지입니다: 제품 게시판 (2 페이지), 데이터시트 (14 페이지), 브로셔 (19 페이지)
페이지 인쇄
Installation Warning Statements
This section includes the basic installation warning statements. Translations of these warning statements appear in the
Regulatory Compliance and Safety Information for the Catalyst 2975 Switch document on the documentation CD.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure
that the system remains stable. The following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the
rack. Statement 1006
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Before Attaching the Brackets
To install the switch in a rack, you must first remove the screws from the switch chassis so that the mounting brackets can be
attached. For attachment at the front-mounting position remove one Phillips truss-head screw from the switch side panels. For
attachment at the mid-mounting position, remove two screws. For attachment at the rear-mounting position, remove one screw.
C at al ys t 29
75 G
Se rie s
Po E -4 8
10