Digiop BLK-IPS101 빠른 설치 매뉴얼 - 페이지 3

{카테고리_이름} Digiop BLK-IPS101에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiop BLK-IPS101 4 페이지. H.264 network ip camera

페이지 인쇄

Attach your camera to the network, power it on, and configuring it with new network settings

Connect the camera to the LAN and apply power to the camera. Wait until the initialization process

completes (2 to 4 minutes) before continuing.

Open the IPAdminTool directory on your computer, then double click the file IPAdminTool.exe to

start the application. When the IPAdmin Tool starts, it will discover all the IP devices it supports that

exist on the network. The discovery process may take a few minutes.

In the Product list, find the entry with the same MAC address as the camera you installed. If the

camera is not shown, click Refresh once a minute to update the list.

Right click on the entry for your camera and select IP Address.

In the IP Setup window:

Select the Static option if it is not selected.

Enter the new IP address for your camera into the IP Address field.

Enter the subnet mask of your computer into the Subnet Mask field.

Enter the gateway of your computer into the Gateway field.

Click SETUP. A Login window will open.

In the Login window, enter the ID and PW

(password) for your camera and click Login. The

default administrator values for the ID and PW are

root and pass.

In the IPAdmin Tool window, click Refresh. Verify that the entry representing the camera now

shows the new IP address.

Step 5.

Setup camera Basic Configuration

To view video images from the camera, at a computer attached to the LAN where the camera is installed,

open Microsoft

Internet Explorer and go to:

http://<IP address of the camera>

If the IP address is 192.168.1.201, enter: http://192.168.1.201

If prompted to install ActiveX controls such as AxAll.cab (publisher Cap Co), AxPTZ, or AxNVC, follow screen

prompts to install the software.

To load these ActiveX controls, you may need to adjust the security settings of your browser to

NOTE

accept add-ins from unknown publishers.

After logging into your camera, if you cannot see live video from the camera and the message: "Can not

Create XMLDOMDocument Install MSXML4.0" appears, download and install the MS XML 4.0 library. This

library can be found at:

http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-

C5D7485F2B42&displaylang=en

www.digiop.com

Static Option

After the camera VIEW screen appears, click SETUP and enter the default User name and Password, root

and pass.

In the SETUP window, go to Basic Configuration > Users.

In the User list, click root to highlight it, and then click Modify. Enter a new password and click OK. In the

Users screen, click Apply, and then click OK to restart the server.

Go to Basic Configuration > Date & Time.

On the Date & Time screen, set the Time Zone, Method, and Time Synchronization options. Click Apply.

Click VIEW to exit SETUP mode and return to the web viewing screen.