Cisco 3560-48PS - Catalyst Switch 데이터시트 - 페이지 8

{카테고리_이름} Cisco 3560-48PS - Catalyst Switch에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3560-48PS - Catalyst Switch 23 페이지. Cisco catalyst 3560-48ts: product brochure
Cisco 3560-48PS - Catalyst Switch에 대해서도 마찬가지입니다: 제품 게시판 (5 페이지), 제품 지원 게시판 (6 페이지), 사양 (3 페이지), 기술 사양 (8 페이지), 제품 지원 게시판 (4 페이지), 브로셔 (8 페이지)

페이지 인쇄

Figure 2.

Cisco Catalyst 3560 SFP Interconnect Cable

Table 1 gives the features and benefits of the Cisco Catalyst 3560 Series. Table 2 gives the

hardware specifications, and Table 3 gives the power specifications. Table 4 lists the management

and standards support, and Table 5 provides the safety and compliance information.

Table 1.

Features and Benefits of Cisco Catalyst 3560 Series

Feature

Ease of Use and Deployment

Cisco EnergyWise

Benefit

● Cisco Express Setup simplifies initial configuration with a Web browser, eliminating the

need for more complex terminal emulation programs and CLI knowledge.

● IEEE 802.3af and Cisco prestandard PoE support comes with automatic discovery to

detect a Cisco prestandard or IEEE 802.3af endpoint and provide the necessary power

without any user configuration.

● DHCP autoconfiguration of multiple switches through a boot server eases switch

deployment.

● Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP)

networks by issuing interface and global switch commands to detect Cisco IP phones,

classify traffic, and enable egress queue configuration.

● Autosensing on each 10/100 port detects the speed of the attached device and

automatically configures the port for 10- or 100-Mbps operation, easing switch

deployment in mixed 10- and 100-Mbps environments.

● Autonegotiating on all ports automatically selects half- or full-duplex transmission mode

to optimize bandwidth.

● Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all

switch ports.

● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel

groups or Gigabit EtherChannel groups to link to another switch, router, or server.

● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling

with devices that conform to IEEE 802.3ad. This feature is similar to Cisco

EtherChannel technology and PAgP.

● DHCP Server enables a convenient deployment option for the assignment of IP

addresses in networks that do not have a dedicated DHCP server.

● DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network

DHCP server.

● IEEE 802.3z-compliant 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-

T, and coarse wavelength-division multiplexing (CWDM) physical interface support

through a field-replaceable SFP module provides unprecedented flexibility in switch

deployment.

● Support for the Cisco Catalyst 3560 SFP Interconnect Cable facilitates a low-cost, point-

to-point gigabit connection between Cisco Catalyst 3560 Series switches.

● The default configuration stored in Flash memory helps ensure that the switch can be

quickly connected to the network and can pass traffic with minimal user intervention.

● Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts

transmit and receive pairs if an incorrect cable type (crossover or straight-through) is

installed on a 10/100 port.

● Time Domain Reflectometry (TDR) to diagnose and resolve cabling problems on copper

Ethernet 10/100/1000 ports.

● Cisco EnergyWise for greenhouse gas emissions and operational cost optimization by

measuring, reporting, and reducing energy consumption across the entire corporate

infrastructure, well beyond the scope of IT.

Data Sheet

Page 8 of 22