DIGIPHOT DM - 50 매뉴얼 - 페이지 8
{카테고리_이름} DIGIPHOT DM - 50에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGIPHOT DM - 50 16 페이지. Portable video magnifier
페이지 인쇄Charging the batteries
Before using the magnifier you have to charge the batteries.
1. Plug the small end of the power adapter into the USB port located
on the left side of the device
adapter into a standard AC outlet. The LED - power indicator
the front of the unit will be red to show that the battery is charging.
Charging time before first use can be up to 10 hours.
2. When the battery is finished charging the indicator LED will be green.
Unplug the adapter and the LED will turn off.
3. You can now use the magnifier for up to 4 hours.
A low battery will be indicated by a red symbol
bottom corner of the screen. You have to connect the power adapter
to recharge the batteries.
Attention:
Always turn the magnifier off when charging. The batteries will not be
charged if the device is turned on while plugged in.
Getting started
Before charging the batteries remove the
protective foil in the battery case!
. Then plug the other end of the
8
on
on the left