Accusplit AX602M500 사용 설명서 - 페이지 3

{카테고리_이름} Accusplit AX602M500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accusplit AX602M500 15 페이지. Digital quartz stopwatches

페이지 인쇄

1. How to Delete All Memory Segments

8-9

This is only a brief description of these buttons.

Detailed uses of the buttons are different in

particular functions and will be described later in

the instructions.

Pressing [MODE] button will toggle among the

modes above. Note that there is no auto-return

function in the stopwatch. Whenever you change

modes, the stopwatch will remain in that mode

until the [MODE] button is pressed again.

10-11

ACCUSPLIT products use a common setting procedure known

as S1-S2-S3-S4.

S1 (2 sec) - Enter set function OR

S1 (4 sec) - Enter set function & clear the current settings

S2 – Select ﬁ eld to be set (selected ﬁ eld will ﬂ ash)

S3 – Set ﬁ eld to desired settings

S4 – Exit setting function

Hour

S1/S4

Year

Month and date

Seconds

Minutes

MODE

Time of Day Mode

The starting point for operating your stopwatch

is TIME OF DAY. If TIME OF DAY is not displayed,

press [Mode] until it is.

Year : - 2008

Date : - January 1

Day of week : - Monday

Time : - 12:00 am

The display format is as below :

During clock display, press [START • SPLIT] to

switch between 12 hr and 24 hr display mode.

To toggle chime ON or OFF , you can press [STOP

• RESET]. The bell icon will be ON or OFF corre-

spondingly.

Normal Time Setting

Press and hold [RECALL] (S1) for 2 seconds to

enter setting mode. The normal time setting starts

with second. The second digits will be ﬂ ashing.

You can change the ﬂ ashing digit by pressing

[START • SPLIT] (S3) button. To speed up the

setting you can press and hold [START • SPLIT]

for longer than 2 seconds to activate fast set-

ting. To select other digits, press [STOP • RESET]

(S2) button. The setting order is: Second, Minute,

Hour, Year, Month, Date, month-date (m-d) or

° year

° day, month - date

° hr : min second