Cisco 3845 - Security Bundle Router 비독점 보안 정책 - 페이지 14
{카테고리_이름} Cisco 3845 - Security Bundle Router에 대한 비독점 보안 정책을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3845 - Security Bundle Router 30 페이지. Integrated services routers
Cisco 3845 - Security Bundle Router에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (38 페이지), 문제 해결 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (40 페이지)
페이지 인쇄
Cisco 3825 and Cisco 3845 Routers
Tamper evidence label B shall be placed so that one half of the label covers the bottom of the front panel
Step 3
and the CF card and the other half covers the enclosure.
Tamper evidence labels C and D should be placed so that the one half of the label covers the enclosure
Step 4
and the other half covers the left and right upper ENM slots.
Tamper evidence label E should be placed so that the one half of the label covers the lower right ENM
Step 5
slot and the other half covers the enclosure.
Tamper evidence label F should be placed so that the one half of the label covers the left upper and lower
Step 6
HWIC slots and the other half covers the enclosure.
Tamper evidence label G should be placed so that the one half of the label covers the right upper and
Step 7
lower HWIC slots and the other half covers the enclosure.
Allow the labels five minutes to completely cure.
Step 8
Figure 7
Figure 7
Figure 8
To apply serialized tamper-evidence labels to the Cisco 3845:
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
Step 1
cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.
Tamper evidence labels A and B should be placed so that one half of the label covers the front panel and
Step 2
the other half covers the enclosure.
Tamper evidence label C should be placed so that one half of the label covers the left upper and lower
Step 3
ENM modules and the other half covers the enclosure.
Tamper evidence labels D and E should be placed so that one half of each label covers the side of right
Step 4
ENM modules and the other half covers the enclosure.
Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy
14
and
Figure 8
show the tamper evidence label placements for the Cisco 3825.
Cisco 3825 Tamper Evident Label Placement (Front View)
Cisco 3825 Tamper Evident Label Placement (Back View)
OL-8662-01