Cisco 4503 - Catalyst Switch 개요 - 페이지 46

{카테고리_이름} Cisco 4503 - Catalyst Switch에 대한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 4503 - Catalyst Switch 46 페이지. Line cards
Cisco 4503 - Catalyst Switch에 대해서도 마찬가지입니다: 설명 (2 페이지), 사용 설명서 (2 페이지), 데이터시트 (23 페이지)

페이지 인쇄

1. Supervisor Engines

Chapter 1

Module Overview and Specifications

Hot-Swapping Feature

To avoid erroneous failure messages, allow at least 15 seconds for the system to

Caution

reinitialize, and note the current configuration of all interfaces before you remove

or insert another switching module.

When you hot swap switching modules, the system displays status messages on

the console screen. The following sample display shows the messages logged by

the system when a switching module is removed from slot 2:

Console> (enable)

2001 Sep 09 12:23:26 %SYS-5-MOD_REMOVE:Module 3 has been removed

Console> (enable)

2001 Sep 09 12:23:44 %SYS-5-MOD_INSERT:Module 3 has been inserted

Console> (enable)

2001 Sep 09 12:23:47 %SYS-5-MOD_OK:Module 3 is online

Console> (enable)

If you use the show port command to query the module before reinstalling a

module to replace the removed one, the system responds, "Module 3 is not

installed." When the module is reinserted, the system recognizes the module as

ready again.

Catalyst 4500 Series Module Installation Guide

1-46

78-13267-06