Cisco 500 Series 빠른 시작 Quide - 페이지 4

{카테고리_이름} Cisco 500 Series에 대한 빠른 시작 Quide을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 13 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

Mounting the Cisco WAP551 and WAP561

Wireless-N Access Points

You can place your access point on a desktop, or mount it on a wall or

ceiling.

Placement Tips

• Ambient Temperature—To prevent the access point from overheating,

do not operate it in an area that exceeds an ambient temperature of

104°F (40°C).

• Air Flow—Both side panels have vents which must be unobstructed to

prevent overheating.

• Mechanical Loading—The device should be level, stable, and secure

to prevent it from sliding or shifting out of position.

The Cisco WAP551 and WAP561 can be wall or ceiling-mounted. There is

a mounting kit packed with your device. The kit is designed to install your

device to the wall or the ceiling.

The mounting bracket has some flexibility so that you can reuse existing

holes drilled for a Cisco WAP121 or WAP321 device. The installer can

remove the Cisco WAP121 or WAP321 and mount the Cisco WAP5xx.

The dimensions for the mount kit screws are as follows:

1 7.8 to 8.3 mm/

.31 to .33 in

Insecure mounting might damage the device or cause injury.

ARNING

Cisco is not responsible for damages incurred by insecure wall

or ceiling mounting.

2 21.8 to 22.3 mm/

.86 to .88 in

Cisco Small Business WAP500 Series Wireless Access Point

3 5.5 to 6.0 mm/

.22 to .24 in

4 17.5 to 18.2mm/

.69 to .72 in