Cisco 550X Series 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Cisco 550X Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 550X Series 21 페이지. Stackable managed switches
Cisco 550X Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (21 페이지)

페이지 인쇄

Reset Button

The switch can be reset by inserting a pin or paper clip into the Reset

button opening on the front panel of the switch. See

550X Series Stackable Managed Switches to the Factory Default

Settings

for details.

Back Panel

The power port and console port are located on the back panel of the

switch.

Power—Connects the switch to AC power.

RPS Port—Connects the switch to the Cisco RPS2300 module. The Cisco

RPS2300 can provide backup power to the switch when the main power

supply has a failure.

Console—Connects a serial cable to a computer serial port so that it can

be configured by using a terminal emulation program.

Returning the Cisco 550X Series

Stackable Managed Switches to the

Factory Default Settings

To use the Reset button to reboot or reset the switch, do the following:

• To reboot the switch, press and hold the Reset button for less than ten

seconds.

• To restore the switch to its factory default settings:

–

Disconnect the switch from the network or disable all DHCP

servers on your network.

–

With the power on, press and hold the Reset button for more than

ten seconds.

Cisco 550X Series Stackable Managed Switches Quick Start Guide

Returning the Cisco