Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 데이터시트 - 페이지 11

{카테고리_이름} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 페이지. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion에 대해서도 마찬가지입니다: 설치 참고 사항 (14 페이지), 솔루션 매뉴얼 (17 페이지), 설치 참고 사항 (46 페이지), 백서 (19 페이지), 설명 (1 페이지), 제품 게시판 (6 페이지), 공지 사항 (4 페이지), 데이터시트 (9 페이지), 백서 (18 페이지), 구성 매뉴얼 (8 페이지), 설치 참고 사항 (28 페이지), 문제 해결 매뉴얼 (11 페이지), 설치 참고 사항 (18 페이지), 사용자 설명서 (17 페이지), 설치 참고 사항 (24 페이지), 매뉴얼 (19 페이지), 설치 참고 사항 (36 페이지)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 데이터시트
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Maximum port density per chassis: These modules support up to 1152 10/100 ports
or 576 10/100/1000 ports in the Cisco Catalyst 6513 chassis; up to 768 10/100 ports or
384 10/100/1000 ports in the Cisco Catalyst 6509 chassis; up to 480 10/100 ports or 240
10/100/1000 ports in the Cisco Catalyst 6506 chassis; and up to 192 10/100 ports or 96
10/100/1000 ports in the small-form-factor Cisco Catalyst 6503 chassis.
Field-installable and -upgradable inline-power daughter cards: These modules help
enable centralized power distribution to IP phones, wireless access points, and other
devices by sharing the same Category 5 UTP cabling used for network connections.
Note:
Some of these modules are designed to support field upgrades to the IEEE 802.3af PoE
standard with a new daughter card, providing maximum investment protection. Table 6 for details.
TDR: TDR is supported in all the 10/100/1000 modules and 10/100 modules (product
numbers WS-X6148A-RJ-45 and WS-X6148A-45AF); TDR tests cabling by sending
signals down the cable to identify faults in each twisted pair.
Table 5.
Classic 10/100 and 10/100/1000 Modules
Product
Primary
Number
Application
WS-
Wiring closet
X6148A-
GE-TX
WS-6148-
Wiring closet
GE-TX
WS-
Wiring closet
X6148A-
GE-45AF
WS-X6148-
Wiring closet
GE-45AF
WS-
Wiring closet
X6148V-
GE-TX
WS-X6348-
Wiring closet
RJ45
WS-X6348-
Wiring closet
RJ45V
WS-X6348-
Wiring closet
RJ21V
4
Queues legend: 1p3q1t = 1 priority queue, 3 round-robin queues, and 1 threshold
Ports,
PoE Support
Connector,
Maximum
Distance, and
Cable Type
48, RJ-45,
Field-
100m, Category
upgradable
5 cable
to Cisco
Prestandard
and IEEE
802.3af
48, RJ-45,
Field-
100m, Category
upgradable
5 cable
to Cisco Pre
standard and
IEEE 802.3af
48, RJ-45,
Yes (both
100m, Category
IEEE 802.3af
5 cable
and Cisco
Prestandard)
48, RJ-45,
Yes (Both both
100m, Category
IEEE 802.3af
5 cable
and Cisco
Prestandard)
48, RJ-45,
Yes,
100m, Category
only Cisco
5 cable
Prestandard
48, RJ-45,
Field-
100m, Category
upgradable
5 cable
to only Cisco
Prestandard
and not IEEE
802.3af
48, RJ-45,
Yes, only
100m, Category
Cisco
5 cable
Prestandard
48, RJ-21,
Yes, only
100m, Category
Cisco
5 cable
Prestandard
Solution Overview
Maximum
Queues
Frame Size
per Port
(jumbo
(Tx=
frame)
Transmit,
Support
Rx=
4
Receive)
Up to 9216
Tx-1p3q8t
bytes per
Rx-1q2t
frame
Up to 1518
Tx-1p2q2t
bytes per
(per 8 ports)
frame
Rx-1p2t (per
port)
Up to 9216
Tx-1p3q8t
bytes per
Rx-1q2t
frame
Up to 1518
Tx-1p2q2t
bytes per
(per 8 ports)
frame
Rx-1p2t (per
port)
Up to 1518
Tx-1p2q2t
bytes per
(per 8 ports)
frame
Rx-1p2t (per
port)
Up to 8092
Tx-2q2t
bytes per
Rx-1q4t
frame
Up to 8092
Tx-2q2t
bytes per
Rx-1q4t
frame
Up to 8092
Tx-2q2t
bytes per
Rx-1q4t
frame
Page 11 of 18
Buffer
Size per
Port
5.5 MB
1.4 MB
per 8
ports
5.5 MB
1.4 MB
per 8
ports
1.4 MB
per 8
ports
128 KB
128 KB
128 KB