Cisco 7507 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Cisco 7507에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7507 39 페이지. Air filter and chassis blower replacement
Cisco 7507에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (44 페이지), 데이터시트 (11 페이지), 교체 지침 매뉴얼 (21 페이지)

페이지 인쇄

Rack-Mount Kit Overview

This section describes the types of racks for which this rack-mounting kit is intended, and the

mounting conﬁgurations that are possible with each type.

Equipment Rack Descriptions

This kit is suitable for mounting the chassis in most 19-inch 2-post, 4-post, or Telco-type racks. The

rack must have at least two mounting posts on which to mount the hardware, and the distance

between the mounting holes in the two posts must be 18.31 inches .063 inches (as speciﬁed in the

Electronic Industries Association (EIA)–310-C standard).

Figure 1 shows the three types of equipment racks described in this document:

•

Figure 1

Caution

Guidelines" on page 8 to familiarize yourself with the proper site and environmental conditions.

Failure to read and follow these guidelines could result in an bodily injury or damage to the system

chassis or components. This procedure requires two or more people to perform.

2 Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions

Figure 1a shows a 2-post rack, which is usually a freestanding enclosed cabinet with two

mounting posts in the front.

Figure 1b shows a Telco-type rack, which comprises two adjacent mounting posts that are

usually secured to the ﬂoor and/or to an overhead structure.

Figure 1c shows a 4-post rack, which is usually a freestanding open rack, which can be either

open or enclosed.

Equipment Rack Types

Before installing the chassis in a rack or wiring closet, read the section "Safety