Cisco 9000 Series 설치 - 페이지 13

{카테고리_이름} Cisco 9000 Series에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9000 Series 19 페이지.

Installing the Cisco MDS 9148V-K9 Switch

Grounding cable, with 0.75 in. (19 mm) of insulation that

is stripped from one end, which is inserted into the

grounding lug and crimped in place.

Step 4

Prepare the other end of the grounding wire and connect it to an appropriate grounding point in your site to ensure an

adequate earth ground for the switch. If the rack is fully bonded and grounded, connect the grounding wire, as explained

in the documentation provided by the vendor from whom you bought the rack.

Installing and Removing Components

Warning

Caution

This section illustrates how to prepare yourself before removing the chassis from the sealed antistatic bag.

The figures show how to cuff the ESD strap around the wrist and the ground cord that connects the cuff to

the ground. ESD wrist straps are the primary means of controlling static charge on personnel.

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution

when servicing. Statement 1034

During this procedure, wear grounding wrist straps to avoid ESD damage to the switch.

Installing and Removing Components

Installing the Cisco MDS 9148V-K9 Switch