Components Supported
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1
Cisco MDS 9000 Family Supported Software and Hardware Components (continued)
Component
Part Number
LC-type
DS-SFP-FC-2G-SW
fiber-optic
DS-SFP-FC-2G-LW
SFP
DS-SFP-FCGE-SW
DS-SFP-FCGE-LW
DS-SFP-GE-T
DS-SFP-FC4G-SW
DS-SFP-FC4G-MR
DS-SFP-FC4G-LW
2
CWDM
DS-CWDM-xxxx
DS-CWDM-MUX-4
DS-CWDM-MUX-8
DS-CWDMCHASSIS Two slot chassis for CWDM add/drop multiplexers.
Power
DS-CAC-6000W
supplies
DS-CAC-2500W
DS-CDC-2500W
DS-CAC-3000W
DS-CAC-4000W-US
DS-CAC-4000W-INT 4000-W AC power supply international (cable attached).
DS-CAC-1900W
DS-CDC-1900W
DS-CAC-845W
DS-CAC-300W
CompactFlash MEM-MDS-FLD51M MDS 9500 supervisor CompactFlash disk, 512 MB.
Port analyzer
DS-PAA-2, DS-PAA
adapter
CD-ROM
M90FMK9-CD322=
1. SFP = small form-factor pluggable
2. CWDM = coarse wavelength division multiplexing
3. W = Watt
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(3)
6
Description
2-Gbps/1-Gbps Fibre Channel—short wavelength SFP.
2-Gbps/1-Gbps Fibre Channel—long wavelength SFP.
1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre
Channel—short wavelength SFP.
1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel—long
wavelength SFP.
1-Gbps Ethernet SFP.
4-Gbps/2-Gbps/1-Gbps Fibre Channel—short wavelength
SFP for DS-X91xx switching modules.
4-Gbps/2-Gbps/1-Gbps Fibre Channel—long wavelength
SFP for DS-X91xx switching modules only. Supports
distances up to 4 km.
4-Gbps/2-Gbps/1-Gbps Fibre Channel—long wavelength
SFP for DS-X91xx switching modules only. Supports
distances up to 10 km.
Gigabit Ethernet and 1-Gbps/2-Gbps/4-Gbps Fibre
Channel SFP LC interface xxxx nm, where xxxx = 1470,
1490, 1510, 1530, 1550, 1570, 1590, or 1610 nm.
Add/drop multiplexer for four CWDM wavelengths.
Add/drop multiplexer for eight CWDM wavelengths.
6000-W AC power supply.
2500-W AC power supply.
2500-W DC power supply.
3000-W AC power supply.
4000-W AC power supply for US (cable attached).
1900-W AC power supply.
1900-W DC power supply.
845-W AC power supply.
3
300-W
AC power supply.
A standalone Fibre Channel-to-Ethernet adapter that
allows for simple, transparent analysis of Fibre Channel
traffic in a switched fabric.
MDS 9000 Management Software and Documentation
CD-ROM, spare.
Applicable Product
MDS 9000 Family
MDS 9500 Series and
9200 Series, except for
the MDS 9216 Switch
MDS 9000 Family
MDS 9513 only
MDS 9509 only
MDS 9506 only
MDS 9200 Series only
MDS 9100 Series only
MDS 9500 Series only
MDS 9000 Family
MDS 9000 Family
OL-14116-11
페이지 인쇄