Caveats
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Workaround: This issue is resolved.
CSCsz84022
•
Symptom: The TPC application cannot discover the MDS 9509 switch when it is connected to an
MDS 9020 switch.
Workaround: This issue is resolved.
CSCsz95999
•
Symptom: A kernel failure in the Mgmt0 driver caused the MDS 9222i switch to reboot
Workaround: This issue is resolved.
CSCta08796
•
Symptom: A memory leak caused the port manager to fail and put the ports in a hardware failure
state.
Workaround: This issue is resolved.
CSCta15575
•
Symptom: The SystemName property on the CIM Server is returning the wrong values for N port
and F port.
Workaround: This issue is resolved.
CSCta28642
•
Symptom: SNMP should gracefully handle timeouts caused by port initialization.
Workaround: This issue is resolved.
CSCta34629
•
Symptom: The system manager core server does not clean up the core files on the MDS 9513
switch.
Workaround: This issue is resolved.
CSCtb29470
•
Symptom: A large sequence number causes Performance Manager in Web Client to not function
properly.
Workaround: This issue is resolved.
•
CSCtb62488
Symptom: Port flaps during a zone set activation cause the zone set to get stuck with the status:
Activation in progress.
Workaround: This issue is resolved.
•
CSCsw87910
Symptom: When running Cisco MDS Release SAN-OS 3.3(2) with DPVM enabled, if a link flaps
for a end device with DPVM enabled, you might see the following message in the output of the show
logging log command:
%DPVM-3-PSS_ERR: Failed to update Login info NPV contextpwwn:
50:00:00:00:aa:99:ee:44, syserr = no such pss key
Workaround: This issue is resolved.
CSCta32005
•
Symptom: Upon receiving an OLS when a link went down, the OLS counter was not incremented.
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(1a)
44
OL-19964-02
페이지 인쇄